Menu

Hot Water Heater Installation Tips

One of the most enjoyable comforts brought about by modern technology to our life is the invention of the water heater. There is nothing more comforting than a hot water bath or shower on a chilly fall morning to wake up a sleepy mind and body. Perhaps it helps clean your skin by removing excess oil and dirt. As a result of the benefits that it provides, people have found it worthy of spending their hard-earned money to have a water heater installed in their house by a water heater repair company.

Here are some tips to have an effective water heater installation if you someday need these services.

Choose the right water heater

If you are planning to install a new water heater, it is vital to choose one that meets your needs. Generally, hot water heaters can be either electric or gas-fueled. While gas water heater may have low operational cost as compared to an electric water heater, it will often vary by the area. Thus, it is necessary to check the ratings on the specific one you want to install before you purchase. Consider all the factors about your house to ensure you choose one that suits the available resource. For example, if your home is not equipped with gas service, it then means an electric water heater will be the only reasonable option.

Take correct measurements

One of the biggest mistakes you can do is purchasing a water heater without knowing the dimensions that will allow it to fit appropriately in your house. Therefore, start by checking the plumbing by measuring all dimensions of the water pipes that existed before to help you find a new heater that will fit correctly. If you are installing for the first time, consider the size, shape, and design of your building to allow proper installation. You may also need to buy some couplers to make the pipes fit correctly, depending on the age of your house.

Turn off utilities

Before you proceed with water heater installation, make sure you turn off all the utilities that are attached to the electric or gas unit. Once turned off, you can now go-ahead to drain the hot water tank and disconnect the old water pipe connection. You can simply hook up a hose to the outlet at the bottom of the tank to drain the water from the tank and then drain it outside or into the drain.

Follow procedural connection of water lines

If you are planning to install a new unit to replace the old one, you can do it with procedural steps. Once you have completely drained water from the old unit and successfully disconnected, then it is the right time to remove that old unit to give space for the new unit. The next step is to install any other fittings such as temperature and pressure relief valve just in case they are not initially installed. Next, use the owner’ s manual to connect water lines to make sure you don’t have any kind of leaks after filling the new tank.

Once all setting is in place, you can then connect your electric or gas line to the power source. But, if you are installing a gas line that uses fuel source, attach the flue vent to allow fumes to find its way out of the house. After that, be sure to fill the water with cold water and turn on the new unit only after making all the connections properly.

So, how do you know if you need a new water heater?

Well! If you are unsure, it is time to install a new water heater; it may be a wise thing to consider the following scenarios:

  • When your old water heater has a higher risk of malfunctioning
  • When your water heater is contaminated and proves serious health hazard
  • When moving into a new home and in need of proper heating that meets your needs
  • When your convectional water tank is causing you repeated trouble

While it is possible to install a new unit of hot water heater on your own, hiring a plumbing professional is often the best way to save you time and money in the long run unless you are experienced in plumbing and plumbing repairs. Fortunately, a professional plumber can provide you with a service that will guarantee you a perfect water heater in your home.

Emergency Plumbing Greensboro

Is It Necessary To Call Out The Emergency Plumber?

It is always worth having some plumbing supplies on hand should something go wrong with your system, as you may be able to fix it yourself. Even if you do have problems with your plumbing, and you cannot deal with it, you may be able to get by without having to use a 24-hour emergency plumbing service.

If, for example, you have a problem with a wash basin, the kitchen sink can be used for washing. While you will need to call out a plumber to have the problem with the wash basin dealt with, you will be spared the cost of having to use a potentially much more expensive emergency plumber working on a round-the-clock call out.

Causes Of Plumbing Emergencies And What To Do When They Occur

1. Gas Leak

There may be times when it is absolutely necessary to call out an emergency plumbing service. One of the most obvious needs for an emergency plumbing service is a gas leak. The smell of gas is often the first indication that something is badly wrong. It is very important that an emergency plumber is called out immediately to deal with it as the leak could result in an explosion, death, injury or serious damage to property. The first thing to do when faced with leaking gas in the home is to switch off the main valve, and the second will be to ring the emergency plumbing service.

2. Breakdown In Heating

A breakdown in heating during the depths of winter is also a plumbing emergency. This is particularly so if there are young children in the home, someone who is elderly or ill, or has failing health. Before putting in a call for an emergency plumber, however, it is first worth checking if the problem can be easily resolved. The thermostat should be checked to see if it has been turned down or switched off. The burner switch should also be checked to see if it has been switched off.

The heating might not be working because the circuit breaker has tripped and if it is reset the heating should come back on. If you burn oil, check to see if your oil tank is empty. If, having made all these checks, there is nothing to indicate why the heating is not working, then it is time to make contact with the emergency plumber.

3. Burst Pipes

Leaking Pipe

There are some emergencies where you should take steps before seeking emergency assistance. If you have a burst pipes then you should first shut off the main water valve before calling out an emergency plumbing service. If you don’t know where any of the emergency shut off valves are contact your plumber. Have them come to your home for an inspection and have them tag the valves and explain which ones to shut off first in an emergency.